AYP int_LOCK BT Manual Del Usuario página 48

6.3.3. Dissuasive alarm
The lock has a vibration sensor that activates a buzzer as soon as any knocks or vibrations
are detected on the door. This will alert intruders in a dissuasive manner.
It can be activated from:
•THE LOCK:
Press and hold the push button for 3 seconds while closing the lock.
•BT REMOTE CONTROL:
Pressing and holding the closing button on the BT remote control for 3 seconds.
•SMARTPHONE-APP:
Activate it from the lock's own option window.
6.4.Factory Reset
To reset the lock completely, first remove the battery. Then insert the tip of the pairing tool into
the synchronisation hole and, keeping it pressed, insert the battery again.
7. ABOUT BATTERIES AND MAINTENANCE
The lock uses a 9V lithium battery. This battery is included in the same box the product
cones in, and can last for more than a year depending on how intensively it is used. Other
batteries with a capacity lower than required can be used, but bear in mind that they will
have a shorter life.
WARNING:
distributed by AYR to avoid possible damage or a considerable reduction in the
autonomy of the system. The use of conventional 9V alkaline batteries is
RECOMMENDED.
48
2
1
It is recommended that you use the specific battery for
2
1
3
int-LOCK
NOT