Intended Use; Improper Use - WIKA 55 Manual De Instrucciones

3. Safety

3.2 Intended use

These bimetal thermometers are mainly used in the process industry
for monitoring the process temperature.
The bimetal thermometer has been designed and built solely for the
intended use described here, and may only be used accordingly.
The technical specifications contained in these operating instructions
must be observed. Improper handling or operation of the bimetal
thermometer outside of its technical specifications requires the
instrument to be taken out of service immediately and inspected by
an authorised WIKA service engineer.
The manufacturer shall not be liable for claims of any type based on
operation contrary to the intended use.

3.3 Improper use

WARNING!
Injuries through improper use
Improper use of the instrument can lead to hazardous
situations and injuries.
▶
Refrain from unauthorised modifications to the
instrument.
▶
Do not use the instrument within hazardous areas.
▶
Do not use the instrument with abrasive or viscous
media.
Any use beyond or different to the intended use is considered as
improper use.
Do not use this instrument in safety or emergency stop devices.
WIKA operating instructions model 55
EN
7