Playing WAV files on SD cards (SD
PLAY mode)
The WAV files in the "MUSIC" folder on an SD card can be played
back. (see "Loading WAV files from a computer" on page 63)
To play files recorded on this unit, use the stereo mix export
function to convert the recorded (mono) files to a single stereo
file. Then, use the SD PLAY mode to play it. (see "Stereo mix
export function" on page 47)
The following audio file formats can be played back in SD PLAY
mode.
WAV: 44.1/48kHz, 16/24-bit
BWF: 44.1/48kHz, 16/24-bit
NOTE
Playback signal is sent from channels 9 and 10.
1.
Set the channel 9/10 MODE switch to "MTR".
2.
Set the channel 9/10 PAN/BAL knob to the center position.
3.
When the recorder is stopped, select SD PLAY on the MENU
Screen, and open the SD PLAY Screen. (see "Menu operation
procedures" on page 29)
4.
Select a file to play back.
i Turn the MULTI JOG dial to select a WAV file.
i Press the MULTI JOG dial when a folder is selected to
show its contents.
i Press the F1
button to return to the MENU
Screen.
i Press the F2
button to move up one level.
NOTE
Only WAV files can be played back. Unsupported files will not
be shown.
10 - Settings and Information
Press the F4
5.
button or 7/9 button to start WAV file
playback.
The SD PLAY Screen will show playback status.
i Press the F1
button to return to the file selection
screen.
i Press the F2
button to turn the repeat playback
function on and select the repeat playback mode.
Display
Meaning
The folder that contains the currently
No indicator
playing WAV file will play back, and
then playback will stop.
The currently playing WAV file will
play back repeatedly.
The folder that contains the currently
playing WAV file will play back
repeatedly.
i Press the F3
button to skip to the beginning of
the WAV file. Press near the beginning of the WAV file to
skip to the beginning of the track before it.
i Press the F4
button to skip to the beginning of
the next WAV file.
Press the F1
6.
button twice to return to the MENU
Screen.
61
TASCAM Model 12