Using Automatic Punching In And Out - Tascam Model 12 Manual Del Usuario

Using automatic punching in and out

Follow these procedures to punch in and out automatically and
record.
1.
Confirm that the
2.
Press the REC buttons for the tracks you want to record
using automatic punch in/out.
NOTE
Punch in recording is not possible when the REC button is on
for eight or more channels.
3.
Press the 0 button.
i The transport starts playback from the pre-roll point.
Both track playback and input source signals can be
monitored. (see "Setting a pre roll point" on page 44)
i When the punch in point is reached, only the input
source signal will be monitored. The 0 button will
light.
i When the punch out point is reached, both track
playback and input source signals will be monitored.
The 0 button will become unlit.
i Playback will automatically stop two seconds after the
punch out point. The 7/9 button will blink.
icon appears on the Home Screen.
6 - Recorder functions
TASCAM Model 12
45