Mark Functions; Using Mark Functions; Adding Marks; Moving Between Marks - Tascam Model 12 Manual Del Usuario

8 - Mark functions

Marks can be used to cue for playback, for example.
In addition to use with this unit, mark information added to WAV
files can be used with software, for example, that supports the
BWF format.

Using mark functions

In order to set and clear marks, the Home Screen F4 button
function must be switched to
NOTE
When the unit is purchased new,
Screen. There is no need to change the function of the F4
button before use.
1.
When the recorder is stopped, select KEY FUNCTION on the
SYSTEM Screen, and open the KEY FUNCTION Screen. (see
"Menu operation procedures" on page 29)
2.
Press the MULTI JOG dial to open the F4 KEY Screen.
3.
Turn the MULTI JOG dial to select MARK.
4.
Press the MULTI JOG dial to confirm the setting.
The KEY FUNCTION Screen reopens.
48
TASCAM Model 12
.
appears on the Home

Adding marks

When playing or recording, press the F4
mark at the current point.
When a mark is added, a pull-up showing the mark number
appears at the bottom of the display.
Mark icons appear below the playback position bar where
marks are set.
o The [ xx ] in the mark name is a number given to all marks
that is incremented in order.
o Marks added during recording will automatically be saved in
the song when recording stops.
o Marks added during playback will not be automatically
saved. Save song information after stopping playback to save
mark data. (see "Saving the current song" on page 36)
NOTE
If an icon appears at the beginning of a song name, it has
unsaved mark data. Save the song information to save the
mark data. (see "Saving the current song" on page 36)

Moving between marks

When stopped, paused or playing back, press the m or ,
button to move (skip) to the previous or next mark.
When skipping, the mark name appears in a pull-up at the
bottom of the display.

Clearing individual marks

Marks can be cleared when stopped or paused.
1.
Skip to a mark that you want to delete when stopped or
paused. (see "Moving between marks" on page 48)
Press the F4
2.
button to open the Mark Clear
confirmation screen.
Press the F4
3.
button to clear the mark.
NOTE
i Repeat steps 1 - 3 to clear multiple marks.
i To clear all marks in the current song, select the CLR ALL
MARKS item from the menu list shown on the SONG Screen.
(see "Clearing all marks" on page 36)
button to add a