Publicidad
Idiomas disponibles
Idiomas disponibles
Mobile LED-light
(ML903 IP 55)
Technical data
Output, supply voltage and safety class:
see identification plate
Operating temperature: -20°C – +50°C
Scope of delivery
The LED floodlight with carrier is delivered ready to
plug in with cable and polarised plug.
Note: The LED floodlight with carrier can be
adjusted within the swivelling range.
Safety notes
This light may not be operated
unless all sealing rings are located properly!
LED-lights are extremely bright. Under no cir-
cumstances look into the light beam of the LED
lights, as this may cause permanent damage to
your eyes.
Immediately replace a damaged pro-
tective cover. Do not use the light with-
out flawless protective cover. First remove
the rubber gaskets over the screws for the protec-
tive cover on the back of the light. Then loosen
the screws to remove the damaged protective
cover and put a new one on. To make sure that
it is water tight, you must put the rubber gaskets
back in place.
To prevent hazards, a damaged flexible outer
lead of this light may only be exchanged by
the manufacturer, his service representative or
by an equally qualified specialist.
Note: Please ensure that the LED floodlight
stands safely and on a firm surface. Please en-
sure that the cable is not getting squashed or
otherwise damaged.
4
GB
All manuals and user guides at all-guides.com
Note: The LED spotlight does not contain any service-
able components. The LEDs cannot be exchanged.
Dispose of electrical goods in an environ-
mentally friendly way!
In accordance with European Directive
2002 / 96 / EC relating to old electrical and elec-
tronic appliances, used electrical equipment must
be collected separately and recycled in an ecologi-
cally compatible way.
Contact your local authorities for information on
how to dispose of the appliance at the end of
product life.
Hugo Brennenstuhl GmbH & Co. KG
Seestraße 1-3 · 72074 Tübingen · Germany
H. Brennenstuhl S.A.S.
F-67460 Souffelweyersheim
lectra-t ag
Blegistrasse 13 · CH-6340 Baar
Maintenance and Cleaning
Unplug the power cord before you clean it!
Please do not use solvents, acidic cleaners etc.
Please only use a dry or damp cloth for cleaning.
Disposal
Do not dispose of electrical equip-
ment in the household waste!
Manufacturer
Publicidad
