Publicidad
Idiomas disponibles
Idiomas disponibles
EN
3
INSTALLATION
3.1
UNPACK THE MACHINE
Make sure that you correctly assemble the machine
before use.
• If the parts are damaged, do not use the machine.
• If you do not have all the parts, do not operate the
machine.
• If the parts are damaged or missing, speak to the
service center.
1.
Open the package.
2.
Read the documentation in the box.
3.
Remove all the unassembled parts from the box.
4.
Remove the machine from the box.
5.
Discard the box and package in compliance with
local regulations.
3.2
INSTALL THE UPPER PANEL AND SPRAY
GUN HOLDER
12
1.
Align the screw sleeves of the front panel (14)
and spray gun holder (1) with the screw holes on
the upper handle (12) .
2.
Tighten them with a Phillips screwdriver (not
included).
WARNING
WARNING
1
14
English
3.3
INSTALL THE HOSE HOOK
1.
Push the hose hook (16) ends into the clips
behind the upper panel tightly .
3.4
INSTALL THE UPPER HANDLE
1.
Align the holes on the upper handle (12) and the
lower handle (5).
2.
Insert the handle bolts and use the handle knobs
to tighten them.
8
16
16
16
12
5
Publicidad
