Emerson FLORET ECO Manual Del Usuario página 17

5. How to Wire Your Ceiling Fan
5.8
Securely connect the Fan Red Wire to the Receiver
Red (TO MOTOR) Wire using a 18 ga. Wire Connector
(supplied with receiver) (Figure 26).
5.9
Securely connect the Fan Yellow Wire to the Receiver
Yellow (TO MOTOR) Wire using a 18 ga. Wire
Connector (supplied with receiver) (Figure 27).
5.10
After Connections have been made, turn Wires and
Connectors upward and carefully push them into the
Outlet Box (Figure 28).
Position the Antenna Wire on top of the Receiver. Slide
the Receiver completely onto the Hanger Ball, nestled
in the Hanger Bracket (Figure 28).
WARNING
!
Check to see that all connections are tight, including
ground, and that no bare wire is visible at the wire
connectors, except for the ground wire. Do not
operate fan until blades are in place. Noise and fan
damage could result.
FAN RED WIRE
RECEIVER RED WIRE
Figure 26
FAN YELLOW
WIRE
RECEIVER
YELLOW WIRE
Figure 27
OUTLET BOX
ANTENNA
WIRE
RECEIVER
Figure 28
Please contact 1-800-654-3545 for further assistance
17
(Continued)
emersonfans.com
ETL Model No.: CF315