Publicidad
Idiomas disponibles
Idiomas disponibles
Cleaning
Only clean the devices when they are switched off.
Clean the enclosure with a damp cloth. Use dishwashing liquid or foaming screen cleaning agent.
Observe the information on chemical resistance (https://support.industry.siemens.com/cs/ww/en/view/39718396) and
supplementary information in the operating instructions.
Maintenance and repair
The product is maintenance-free. Repairs to the product may only be carried out by the manufacturer. Observe the
information in the operating instructions.
Recycling and disposal
Contact a certified disposal service company for electronic scrap for environmentally sustainable recycling and disposal of
your old device. Dispose of the product according to the respective regulations in your country.
Accessories
For information on approved accessories, refer to the operating instructions.
Functional safety
This section applies to Extension Units that are equipped with fail-safe operator controls.
WARNING
Danger to humans and the environment
To avoid danger to people and the environment, under no circumstances may you bypass safety functions or take measures
that amount to or result in bypassing safety functions. The manufacturer is not liable for the consequences of such
manipulation or for damages resulting from the failure to heed this warning.
Perform a safety inspection for safety-related functions throughout the entire system, including all safety-related
components.
For fail-safe Extension Units, observe the notes and warnings in the operating instructions, especially in regard to the
following:
•
Connecting/wiring
•
Parameter assignment
•
Fail-safe operation
•
Status, error messages and alarms (visualization via module diagnostics)
•
Maintenance (recurring tests, software/firmware updates)
•
Checking for proper function
•
Technical specifications
You can find information on achieving the required safety class (SIL) in the operating instructions.
Make sure that the HMI device is configured and parameterized for fail-safe operation according to the operating instructions.
Perform function tests for safety functions according to your automation task. They may only be used in production when the
correct operation of the safety-related functions is ensured.
Extension Units, Extension Units KPxx
A5E52377644-AA, 11/2022
9
Publicidad
