Publicidad
Idiomas disponibles
Idiomas disponibles
(78)
Haojue TZ150/TZ150S 99011H36622H000 V03 ES+EN 2019-8-26
FUEL AND OIL RECOMMENDATIONS
FUEL OCTANE RATING
Use nonleaded gasoline with an octane rating of 90 or
higher.
NOTE: If leadless gasoline is used, the spark plug can
have a longer service life.
ENGINE OIL
Oil quality is a major contributor to your engine's
performance and life. Always select good quality engine
oil. Use oil with an API classification of SG or higher.
If SAE 10W-40 engine oil is not available, select an
alternative according to the following charts.
EN
NOTE: Dispose of waste engine oil properly to avoid
environmental contamination. We suggest you to collect
the waste oil in a sealed container and take it to a nearby
recycling facility. Do not place it into a trash bin and do not
pour it on the ground.
(78)
Haojue TZ150/TZ150S 99011H36622H000 V03 ES+EN 2019-8-26
BREAK-IN
Correctly breaking in the motorcycle can improve its life,
and at the same time fully bring out the performance
of motorcycle. The following guidelines explain proper
break-in procedures:
RECOMMENDED THROTTLE LIMIT
Throttle opening must not reach maximum during the new
motorcycle brake-in period; it is suggested to be less than
3/4 of the maximum, while snap-acceleration must be
avoided while riding.
VARY GEAR POSITION AND ENGINE SPEED
The gear position and engine speed should be changed
frequently instead of being kept in a constant gear
position and speed. During the break-in period, proper
acceleration will ensure a complete break-in. However, do
not exceed the recommended throttle opening limit.
BREAKING IN THE NEW TIRES
New tires need proper break-in to assure maximum
performance, just as the engine does.
tread surface by gradually increasing your cornering lean
angles over the first 160 km before attempting maximum
performance. Avoid hard acceleration, hard cornering,
and hard braking for the first 160 km.
18
Wear in the
Publicidad
