RIDING ON HILLS
When climbing steep hills, the motorcycle may begin
•
to slow down and show reduced power. At this point
you should shift to a lower gear so that the engine
will again be operating in its normal power range.
Shift rapidly to prevent the motorcycle from losing
momentum.
When descending a long, steep slope, use engine
•
compression to assist the brakes by shifting to a lower
gear. Continuous brake application can overheat the
brakes and reduce their effectiveness.
Be careful, however, not to allow the engine to overrev.
•
Haojue TZ150/TZ150S 99011H36622H000 V03 ES+EN 2019-8-26
STOPPING AND PARKING
1. Twist the throttle grip away from you to close the
2. Apply the front and rear brakes evenly and at the same
3. Downshift through the gears as road speed
4. Select neutral just before the motorcycle stops. The
5. Park the motorcycle on a firm, flat surface where it will
6. Turn the key to the "%" position.
7. Turn the handlebars all the way to the left and lock the
8. Remove the key.
Hard braking while turning, on wet, loose, rough,
or other slippery surface may cause wheel skid and
loss of control.
25
Haojue TZ150/TZ150S 99011H36622H000 V03 ES+EN 2019-8-26
throttle completely.
time.
decreases.
neutral position can be confirmed by observing the
neutral indicator "N".
not fall over.
steering for security.
BWARNING
(85)
EN
(85)