Publicidad
Idiomas disponibles
Idiomas disponibles
Gateway Setup
NOTE!
If the user forgets the password, reset the Cassia X2000 gateway to the factory settings by pressing
the reset button located at the bottom of the product for 15 seconds. The password will be "admin"
again, and a new password will be requested.
5.3 BASIC GATEWAY SETTINGS
After entering the username and password, you will be redirected to a settings panel with 5 possible tabs: "Status",
"Basic", "Container", "Events" and "Other". Select the "Basic" tab. On this tab, you will set all the information
necessary for the correct operation of the gateway together with the WEG Motion Fleet Management platform.
The figure below shows the gateway basic data.
Field Name
Gateway Name
Gateway Mode
Tx Power
External Antenna
AC Server Address
AC-Gateway Protocol
Priority
Connection Priority
Enable OAuth2 Token
for Local API
Remote Assistance
Once all the fields above have been filled in and saved by clicking on the "Apply" button, we can go to the
configuration of the internet gateway connection also located on the "Basics" tab.
26 | Gateway Cassia X2000
Figure 5.7: Cassia X2000 gateway basic data screen
Table 5.2: Table with the gateway basic data configuration fields
Default Value
The name entered in this field will be used to identify the gateway in the WEG
Motion Fleet Management Platform
AC Managed
Gateway operating mode. Keep this field as "AC Managed Gateway" so that
Gateway
it can be used with the WEG system
19
Bluetooth signal strength. Keep it at 20 for maximum strength
Selection of Bluetooth antennas. Keep this field as "Both" to use the external
Both
antennas included in the product
Insert the address "cassia.weg.net" so that the gateway can be used with the
cassia.weg.net
WEG system
Protocol used to communicate with the gateway management system. Keep
MQTT
MQTT for best results
Select the type of internet connection previously chosen for the infrastructure.
Wired
The options are "Wired" (Ethernet), "Wi-Fi" and "Cellular" (3G/4G)
OFF
This option is not used in the WEG system. Keep it as "OFF"
This option opens a channel for WEG assistance. If you need more security
ON
on the network, keep it as "OFF"
Description
Publicidad
