Descargar Imprimir esta página

Publicidad

49

Button Sewing

Pattern
Stitch Length
(Zigzag Stitch)
1. Measure the distance between the holes and set the appropriate
stitch width with the stitch width dial. For example, if the distance
between the holes is 1.5 mm (1/16"), set the stitch width to "1.5".
2. Attach the button sewing foot.
3. Place the darning plate on the needle plate.
(When the machine is equipped with a drop feed lever, lower the
feed dogs by setting the drop feed lever to the up position.)
4. Place a button between the foot and the fabric and make sure that
the needle enters the holes without hitting the button. If it hits, see
step 1.
5. At a slow speed, sew approximately 10 stitches.
6. Remove the material from the machine. Cut the upper and lower
threads and tie the two threads at the back of the fabric.
Stitch Width
Foot
Button
Any
Sewing Foot

Publicidad

Capítulos

loading

Este manual también es adecuado para:

Xl-5232Xl-5340