User Interface - WIKA Mensor CPC2000 Manual De Instrucciones

4. Design and function
4.4

User interface

The CPC2000 low-pressure controller can be operated via its clearly structured display
and control panel.
Function buttons
Pos. Button Meaning
LEAK button
1
With the [LEAK] button, an instrument connected to the controller
LEAK
can be tested for leaks. (This feature is only possible in CONTROL
mode.)
MENU button
2
With this button the SETUP menu can be accessed, and there the
MENU
settings for each operating mode can be made. When the CTRL
mode is used, you will find that the instrument is left in VENT mode
on leaving the SETUP menu.
The SETUP menu items are made up of six submenu items. For a
detailed description of these items, see chapter 6.9 "SETUP settings
(SETUP)".
Increase set point
3
Change pressure in % via [▲] button
Increase set point to 100 %
4
Change pressure to 100 % via [▶] button
WIKA operating instructions, model CPC2000
1 2 3
9 8 7
4
5
6
EN
15