The Menu Items; Settings Submenu Item - WIKA Mensor CPC2000 Manual De Instrucciones

6. Commissioning, operation

6.9.1 The menu items

1. Press the [MENU] button.
2. Select menu item with the [▲] / [▼] buttons.
3. Confirm with [SELECT].
⇒
Selected menu item will be accessed.

6.9.2 SETTINGS submenu item

Menu item
ZERO
RS232/USB
DISPLAY
AUTO-MODE
INFO
WIKA operating instructions, model CPC2000
SETTINGS
-------------------------
ZERO
RS232/USB
DISPLAY
AUTO-MODE
INFO
Meaning
Switching on and off of the automatic zero point correction following exit
from the menu. It is even possible to set at what intervals the instrument
will automatically perform a zero point correction.
Selection of the appropriate serial interface
Brightness setting
Setting of the pressure range, the pressure unit and number of steps the
pressure range will be divided up into. The STEPS UP / STEPS DOWN
can be assigned different values.
Basic information on the instrument
-->
-->
-->
-->
-->
EN
27