Publicidad
Idiomas disponibles
Idiomas disponibles
adequate size conductors that is capable
of carrying the current necessary for your
tool must be used. This will prevent exces-
sive voltage drop, loss of power or overheat-
ing. Grounded tools must use 3-wire extension
cords that have 3-prong plugs and recepta-
cles.
against electric shock from possible de-
fects or faults in an extension cord. If the
use of an extension cord is necessary, the ex-
tension cord must be plugged into a GFCI pro-
tected outlet.
Store accessories in a dry and temperate environment to avoid corrosion and deteriora-
tion.
Included Accessories
Wrench
Vacuum Hose Adapter with Clamp
Water Feed Assembly
Quick-connect Hose Adapter
Side Handle
Extension cords
If an extension cord is
necessary, a cord with
The GFCI supplied with
the tool may not guard
The use of any other accessories not specified in this manual may cre-
ate a hazard.
RECOMMENDED SIZES OF EXTENSION
NOTE: The smaller the gauge number, the
higher the cord capacity.
Tool's
Ampere
Rating
3-6
6-8
8-10
10-12
12-16
Accessories
7" (178mm) Segmented diamond cut-off
wheel less than 3/8" (10mm) thick, having a
negative rake angle and no more than 3/8"
(10mm) gap between the segments.
CORDS
120 VOLT ALTERNATING
CURRENT TOOLS
Cord Size in A.W.G.
Cord length in feet
25
50
100
150
18
16
16
14
18
16
14
12
18
16
14
12
16
16
14
12
14
12
—
—
Optional Accessories
Wire Sizes in mm
2
Cord length in Meters
15
30
60
120
0.75
0.75
1.5
2.5
0.75
1.0
2.5
4.0
0.75
1.0
2.5
4.0
1.0
2.5
4.0
—
—
—
—
—
17
Publicidad
