I. INSTALLATION INSTRUCTIONS
1. CONSTRUCTION
Operation Panel
Front Panel (Left)
Louver
Air Filter
[FM-120KE-HC, 80KE-HC]
2. LOCATION
This icemaker is not intended for outdoor use.
The icemaker should not be located next to ovens, grills or other high heat producing
equipment.
This appliance is not suitable for installation in an area where a water jet could be used.
The location should provide a firm and level foundation for the icemaker.
Do not place anything on top of the icemaker or in front of the louver.
Normal operating ambient temperature should be within 5°C to 40°C. Water connection is
cold water only. Operation of the icemaker, for extended periods, outside of these normal
temperature ranges may affect production capacity.
Allow the clearance specified below for proper air circulation and ease of maintenance and/or
service should they be required.
Top View
Left
In some high humidity environments, condensation may form inside the machine and drip onto
the floor. Do not install where the floor can be affected by water.
Avoid prolonged exposure of the appliance to direct sunlight.
Top Panel
Rear
15cm
15cm
ICEMAKER
Front
Storage Bin
Door
Door
Front Panel
Operation Panel
Front Cover
WARNING
CAUTION
NOTICE
IMPORTANT
Side View
Right
15cm
3
[FM-60KE-HC, CM-50KE-HC]
Top
15cm
Front
Rear
15cm
ICEMAKER
ENGLISH
Top Panel
Storage Bin
Air Filter