essentiel b ERLV170-60hib1 Instrucciones De Uso página 29

If you want to shut down your device for a long time, disconnect the power plug.
2- Temperature setting
For optimal food preservation, we recommend that when you turn on your refrigerator for the first
time, you set the temperature to 4°C (39°F). If you need to change the temperature later, follow the
instructions below.
Attention!
!
When you set the temperature, you are setting an average temperature for the entire refrigerator.
The temperature inside each compartment may differ from the temperature values displayed on
the control panel, depending on the amount of food you store and where you place it. Ambient
temperature can also affect the actual temperature inside the device.
N : A high temperature setting will accelerate food waste.
ote
You can switch between temperature display in degrees Celsius (°C) and degrees Fahrenheit (°F)
by pressing the key for 3 seconds.
°C
In unlocked mode, press the key when the " " indicator light is on, the refrigerator set
temperature is adjusted cyclically between 8°C and 2°C.
°F
When the " " indicator light is on, the refrigerator set point temperature is adjusted cyclically
between 46°F and 36°F.
3- Fast cooling ("Super cool")
This function allows you to quickly refrigerate a large quantity of food (when returning from shopping,
for example). Remember to select this function a little before putting your groceries in the fridge.
In unlocked mode, press the key to enter fast cooling mode. The mode indicator
light comes on and the temperature is set to 2°C (36°F).
Fast cooling mode automatically stops after approximately 6 hours.
When this mode is activated, in unlocked mode, you can deactivate it by pressing the
key and the refrigerator temperature setting will return to the previous setting.
29