Cameo G4 TW Manual De Usuario página 11

4. With permanently installed devices, the accumulation of impurities, e.g. dust, is to
be expected. Always observe the care instructions.
5. Unless explicitly stated otherwise on the device or in the technical data, the devices
are intended for installation heights of less than 5 m.
INCLUDED
Remove the product from the packaging and remove all packaging material. Please check the
completeness and integrity of the delivery and notify your distribution partner immediately after
purchase if the delivery is not complete or if it is damaged.
Included with the product CLG4TW are:
X 1 x Cameo G4TW spotlight, black
X User manual
Included in the scope of delivery of the product CLG4TWWH are:
X 1 x Cameo G4TW spotlight, white
X User manual
INTRODUCTION
LED Gallery Light with one 40 W Cold White / Warm White LED
CLG4TW (black housing)
CLG4TWWH (white housing)
CONTROL FUNCTIONS
1CH, 2CH 16 bit, 2CH CCT, 2CH WW-CW and 7CH 16 bit DMX control W-DMX
Standalone function (set up via Cameo Unicon)
FEATURES
Compatible with GLOBAL pro (formerly NOKIA) XTS, XTTS and XTSC 3-phase tracks.
40 W CW / WW LED. W-DMX
Diffusing screens, filters and straightening grids optionally available.
The spotlight features the RDM standard (Remote Device Management). This remote unit manage-
ment enables status query and configuration of RDM end devices via an RDM-capable controller,
such as the optionally available Unit Controller Cameo UNICON (item number CLIREMOTE).
The Cameo UNICON also allows access to the entire fixture menu.
. DMX512. RJ45 connection Operating voltage: 100–240 V AC.
™
™
11