Cameo G4 TW Manual De Usuario página 15

All information and configuration options for the spotlight that can be called up and edited via
RDM are now displayed.
List of information and configuration options with explanations:
Individual and unchangeable identification number of the selected RDM
UID:
device
Label: Individually adjustable marking of the RDM unit
Model: Device model
Manufacturer:
Device manufacturer
Firmware:
Device firmware
Identify:
DMX Address Current DMX start address (can be edited in the menu option)
DMX Personality: Current DMX mode (can be edited in the menu option)
DMX Slots: Number of channels in current DMX mode
Sensor LED temperature (press ✔ to display)
Individual Cameo device menu for editing settings
Fixture Menu
(see DEVICE MENU [Fixture Menu])
LABEL
In the RDM/Fixture menu, select Label and confirm the selection to individually name the RDM
device.
ON Selected spotlight flashes with approx. 1 Hz
OFF Flashing disabled
Select characters:
Delete all characters:
Set space:
Reset position:
Secure labelling:
Confirm command or charac-
ter and select the next digit:
 or  or turn the encoder
Reset
Space
Clean
Save
Press ✔ or encoder
15