Electrolux EI24ID50Q Guía De Uso Y Cuidado página 6

6 Operating Instructions
W a s h C y c l e S e l e c t i o n s
Cycle times are approximate and vary by options
selected. Hot water is necessary to activate
dishwasher detergent and melt fatty food soils.
An automatic sensor checks the water temperature
for the main wash of each cycle. When HI-TEMP
is selected, the sensor checks for an even higher
temperature. Run hot water in a faucet nearest the
dishwasher until water is hot before starting.
C y c l e S e l e c t i o n s
The Smart Sensor checks the soil level on your
dishes in the Auto, Normal and Eco cycles. Cycle
time and water usage will vary based on the
amount of soil on the dishes.
Auto
The dishwasher's Smart Sensor technology will
determine the type of cycle required to clean the
dishes and will clean more effi ciently every time.
When a partial load of lightly soiled dishes are
placed in the unit, a wash cycle similar to a short
wash will automatically be performed. When a full
load of heavily solid dishes is placed in the unit, a
heavy wash cycle will automatically be performed.
Water usage ranges from approximately 3.0 to 7.4
gallons. Wash time ranges from approximately 118
to 200 mins.
Heavy
For pots, pans, casserole dishes and dinnerware
with dried-on or baked-on soils. Water usage
ranges from approximately 7.1 to 8.1 gallons.
Wash time ranges from approximately 129 to 189
mins.
Normal
For regularly soiled dishes and silverware. Water
usage ranges from approximately 3.0 to 7.4
gallons. Wash time ranges from approximately 118
to 200 mins.
Eco
For lightly soiled and pre-rinsed dishes
and silverware. Water usage ranges from
approximately 4.3 to 7.7 gallons. Wash time ranges
from approximately 86 to 93 mins.
Rinse
For rinsing dishes that will be washed later. Water
usage is approximately 2.2 gallons. Cycle time is
approximately 15 mins.
Favorite
This cycle allows you to program your preferred
cycle and options into one button. To program this
cycle: select the cycle and options your desire then
press and hold the Favorite pad until the LED come
on. The selected cycle and options are saved as
the FAVORITE. All the settings that were chosen
are illuminated. Once programmed, simply press
the Favorite pad to select the saved cycle and
options, press the Start pad and close the door
immediately to start your programmed cycle.
Fast
For regularly soiled and pre-rinsed dishes and
silverware. Water usage is approximately 4.5
gallons. Wash time is approximately 30 mins.
Upper
For lightly soiled and pre-rinsed dishes and
silverware when you do not have a full load. Water
usage is approximately 3.5 to 4.3 gallons. Wash
time ranges from approximately 52 to 128 mins.
Stemware
For regularly soiled China and Crystal. Water
usage is approximately 18.5 gallons. Wash time
ranges from approximately 96 to 116 mins.
E n e r g y O p t i o n S e l e c t i o n s
Hi-Temp
When HI-TEMP option is selected, the dishwasher
heats water in the main wash to approximately
140 0 F (60 0 C).
This increase in water temperature helps
dishwasher detergent remove food, grease and soil
from dishes more effectively and aids in drying. HI-
TEMP option can only be used with AUTO, HEAVY,
NORMAL and UPPER cycles.
Max Dry
MAX DRY is available on Auto, Heavy, Normal,
Upper and Stemware cycles The cycle time will
increase when MAX DRY option is selected.