Descargar Imprimir esta página

Electrolux EI24ID50Q Guía De Uso Y Cuidado página 7

Publicidad

Idiomas disponibles

Idiomas disponibles

Sanitize
To sanitize your dishes and glassware, select the
SANITIZE option. This option heats the water
temperature in the fi nal rinse to 157
and maintains that temperature for 7 minutes.
SANITIZE is available in Auto, Heavy, and Normal
cycles. Only these sanitization cycles have been
designed to meet NSF requirements.
The cycle time will be extended until the proper
water temperature is reached. Washing action will
continue during the water heating delay. For best
results, the incoming water temperature should be
at least 120
0
F (49
0
C).
If the SANITIZE option is selected, the led above
the pad comes on. The sanitization criteria may
not be satisfi ed if there is an interruption of the
cycle, a power failure occurs, or if incoming water
temperature is below 120
Sanitize led fl ashes at the end of the cycle if the
NSF requirements for sanitization are not reached.
Child Lock Controls/Air Dry
To prevent children from accidentally changing
the dishwasher cycle or starting the dishwasher,
lock the dishwasher controls by pressing the AIR
DRY pad until "Loc" shows in the status window.
The controls are locked and no new selections
can be made until the lock is released. To unlock
the controls, press the AIR DRY pad until "Loc"
disappears.
O p e r a t i o n S e l e c t i o n
Start
When cycle and options are selected, the LEDs
of selected cycle and options are illuminated. The
status window displays the cycle time and then
displays 'Press Start'.
To start the cycle, press START pad and close the
dishwasher door immediately.
The status window displays 'Close door' after the
START pad is pressed.
A tone will sound indicating the cycle has
successfully started after the door is closed.
Operating Instructions
0
0
F (69.4
C)
0
0
F (49
C).
Delay
The DELAY START option allows you to
automatically delay starting your dishwasher from
1-24 hours.
Select your desired cycle and options, then press
the DELAY pad until the desired delay time displays
in the status window. The LEDs of selected cycle
and options are illuminated. The status window
displays the delay time and then displays 'Press
Start'.
To start the delay countdown, press START pad
and close door immediately.
The status window displays 'Close door' after the
START pad is pressed.
A tone will sound indicating that countdown has
started after the door is closed. The selected cycle
starts when the countdown is completed.
Cancel
Both running cycle and delay countdown can be
cancelled at any time.
Open the dishwasher door, press the CANCEL pad
until you hear a tone. The running cycle or delay-
count down is cancelled.
If desired, a new cycle can now be selected,by
pressing the START pad and closing the door im-
mediately, the new cycle will begin.
Opening the door while the appliance operates
If you open the door while a cycle is running or
delay is counting down, the dishwasher will stop
running. The LEDs of the running cycle and
options are illuminated, the status window displays
the remaining cycle time or delay time and displays
'Press Start'.
To resume, press START pad and close the
dishwasher door immediately. The status window
displays 'Close door' after the START pad is
pressed.
A tone will sound indicating that the dishwasher will
begin running from the point of interruption after
the door is closed.
If the dishwasher door is kept open for too long,
or the door is closed without pressing START
pad, the running cycle or delay countdown will be
cancelled.
7

Publicidad

loading