Ryobi TSS701 Manual Del Operador página 17

 Release the detent release lever, and ensure the control
arm is seated in the positive notch.
 Tighten the miter lock knob to secure the miter table.
 Loosen bevel lock knob and set saw arm at 0° bevel (blade
set 90° to miter table). Tighten bevel lock knob.
 Lay a square flat on the miter table. Place one leg of the
square against the fence. Slide the other leg of the square
against the flat part of saw blade.
NOTE: Make sure that the square contacts the flat part of
the saw blade, not the blade teeth.
SQUARE
MITER
FENCE
MITER
TABLE
VIEW OF BLADE SQUARE WITH FENCE
MITER
MITER
TABLE
FENCE
VIEW OF BLADE NOT SQUARE WITH
FENCE, ADJUSTMENTS ARE REQUIRED
MITER
LOCK HANDLE
SQUARE
ASSEMBLY
MITER
FENCE
BLADE
Fig. 16
BLADE
INDICATOR
SCREW
Fig. 17
17 − English
SQUARE
MITER
TABLE
VIEW OF BLADE NOT SQUARE WITH
FENCE, ADJUSTMENTS ARE REQUIRED
BEVEL
SCALE
SCALE
INDICATOR
SCALE
INDICATOR
MITER SCALE
BLADE
Fig. 18
BEVEL
LOCK KNOB
INDICATOR
SCREW
Fig. 19
Fig. 20