Publicidad
Idiomas disponibles
Idiomas disponibles
en-us Installation Procedure
Feed the power cord through the low hole in the cabinet
1.
first and then add the hoses.
Using both hands, push dishwasher 1/3 of the way into
2.
the cabinet and STOP.
Pull the hoses and power cord through the hole in
3.
cabinet as shown.
Push the unit 2/3 of the way into the opening and
4.
STOP.
Reach into adjacent cabinet and pull hoses and excess
5.
power cord completely out so they do not get kinked.
12
Finally, push the unit in until flush with cabinet door.
6.
4.9 Level the Dishwasher
Now that the dishwasher is in the cabinet, check the levels
again.
Level side to side by turning feet clockwise to raise or
1.
counter-clockwise to lower front.
Level front to back by turning center screw clockwise to
2.
raise or counter-clockwise to lower the back.
Publicidad
