Publicidad
Idiomas disponibles
Idiomas disponibles
en-us Installation Procedure
For Side Mount, lift the flap on the deco strip and insert
3.
the 1/2" (12.7mm) wood screws underneath.
4.12 Attach the Standard Toe Panel
Insert the toe panel brackets into the openings on both
1.
sides by pressing hard until they are fully seated.
Use the 3/4" (19mm) toe panel bracket screws to mount
2.
metal brackets to the base
Slide toe panel into position ensuring the bottom of the
3.
toe panel is flush with the floor.
14
Use the 9/16" (14mm) toe panel screws to mount the
4.
toe panel through the hole it matches up with on the
metal brackets.
The toe panel height can be adjusted by screwing into a
different hole in the bracket.
4.13 Attach Plastic Toe Panel
If your dishwasher came with a plastic toe panel and
slotted toe panel, follow these instructions.
Align the plastic toe panel on the base of the
1.
dishwasher so the holes lines up.
Attach using 2 of the included 3/4" (19mm) screws.
2.
Use only the included screws to avoid damaging the
‒
dishwasher.
Slide the slotted toe panel into position ensuring that the
3.
bottom of the toe panel is flush with the floor.
Screw the slotted toe panel into place with the
4.
remaining 3/4"(19mm) screws.
Publicidad
