Use a level to check that your dishwasher is level.
3.
Check that the countertop is level and adjust the
dishwasher to the countertop.
Make sure the top of the door is no less than 1/4"
4.
(6mm) from the underside of the counter.
4.10 Outer Door Assembly
Follow the instructions for outer door assembly on the
▶
fully integrated template.
Note: The door panel should weigh between 9 and 18 lbs,
be at least 3/4" thick, and not exceed 30 1/8" in length.
4.11 Secure the Dishwasher
Center the dishwasher in the opening.
1.
If using the Top Mount, and screw the 1/2" (12.7mm)
2.
wood screws through the holes in the mounting
brackets. Choose the bracket hole best suited for your
installation.
If the dishwasher came with a protective barrier, screw
through the barrier.
Installation Procedure en-us
x
=
x
13