GreenWorks 2101602CT Manual Del Operador página 7

WARNING
• If the parts are damaged, do not use the machine.
• If you do not have all the parts, do not operate the
machine.
• If the parts are damaged or missing, speak to the service
center.
1. Open the package.
2. Read the documentation in the box.
3. Remove all the unassembled parts from the box.
4. Remove the machine from the box.
5. Discard the box and package in compliance with local
regulations.
8.2 ATTACH THE GUARD
WARNING
Do not touch the cut-off blade.
1. Remove the screws (1) from the trimmer head with a
Phillips head screwdriver (not included).
2. Put the guard （2） onto the trimmer head.
3. Align the screw holes on the guard （3）with the screw
holes on the trimmer head （4）.
4. Tighten the screws.
8.3 ASSEMBLE THE SHAFT
1. Loosen the knob (1) on the coupler.
English
1
2
3
4
2. Push in the release button (2) on the lower shaft (3).
3. Align the release button (2) with the positioning hole (4)
and slide the two shafts.
2
3
4. Turn the lower shaft until the button locks into the
positioning hole.
2
5. Tighten the knob.
TIGHTEN
8.4 ATTACH THE AUXILIARY
HANDLE
1. Press the auxiliary handle (1) onto the upper shaft.
2. Slide the auxiliary handle over the metal ring (2) and
ensure the metal ring fits between the slot on the auxiliary
handle.
1
2
3. Align the holes on the auxiliary handle with the holes on
metal ring.
7
4
5
1
5
LOOSEN
1
EN