Publicidad
Idiomas disponibles
Idiomas disponibles
2. Part Names and Operating Parts
10
Part Names
Oil dipstick
Crankcase
Instruction manual
(1) Oil filler cap
(2) Pushrod oil port:
(3) Discharge port
(4) Drain plug:
(5) Label:
Product Features
・The water intake mechanism is effective since the chemical solution always flows in one direction.
・The piston packing made of a special rubber has a resistance to chemicals.
・Low and stable pulsation in spraying even if without an air chamber.
(2) Pushrod oil port
(1) Oil filler cap
Functions of Operating Parts
Before starting operation, open this cap and be sure to refill the gasoline
engine oil (SAE 10W-30 or equivalent).
Before starting, refill about 3 to 5 drops of gasoline engine oil (SAE 10W-30
or equivalent). To the holes on the front of the crankcase every 100 hours of
operation.
Used to connect the spraying hose.
Loosen this plug to drain water. Water in the pump can be removed.
Indicates the serial number.
Part Names
(5) Label
(3) Discharge port
(4) Drain plug
Publicidad
