Maruyama MS600F Manual De Instrucciones página 13

CAUTION
Before attaching the suction hose and bypass hose, check the packing. Particularly for the
suction hose, vibration and insufficient water intake on this machine may be caused, resulting
in the reduced pump life.
・Attach the strainer to the water intake hose.
WARNING
When starting, perform test run with fresh water to make sure that the power sprayer and pipe fittings
are not faulty. At one time, make sure that the sprayer rotation direction is same as the rotation arrow
sticker on the crankcase. If it is backward, the sprayer cannot give the proper performance.
CAUTION
If the power sprayer is faulty, stop it immediately. See Troubleshooting and Actions for Power
Sprayer on Pages 13 and 14.
・Release the pressure regulator.
CAUTION
Note that starting in the pressurized state may damage the piston packing because water
intake cannot be performed and idling occurs.
・ At the start and during operation, be sure to keep the belt cover being attached.
WARNING
Since the rotary part may result in injury to personnel, be sure to attach the belt cover. If the
belt cover cannot be attached, be sure to take special considerations e.g. provide a fence
around the working machine.
CAUTION
Make sure that water intake is in progress. If water intake is not performed (idling is kept) for at
least one minute after the start, the piston packing will be damaged. Again, see
Troubleshooting and Actions on Pages 13 and 14 and repeat the operation.
CAUTION
If the pressure is suddenly increased during two-person operation, a strong reaction force is given to the
spray apparatus and it is dangerous. Open the valve after a sign is given in advance from spray operator.
・When stopping the operation, release pressure remaining in the hose. If a positive pressure
remains, the pressurized liquid may come out when removing the pipe.
3. How to Handle and Operate
Preparation and Check – Spraying-Stop
CAUTION
This power sprayer does not contain oil. Before use, be
sure to supply oil.
・Supply the gasoline engine oil (SAE 10W-30 or equivalent),
and make sure the oil level is correct using the dipstick
gauge on the rear cover.
11