Sanus VML10 Manual De Instrucciones página 5

1-2
Attach brackets to a TV with an irregular back
1
[02]
[15, 16]
[14]
M4
[02]
[15]
2
Adjust Cord Length
6901-002029 <08>
2
[15, 16]
[14]
[02]
[14]
[12]
1. Push the shoulder washer [14] through the appropriate openings
of the brackets [02].
2. Snap shoulder washer [14] into the spacer you selected in step
1-1.
If your TV has a curved or obstructed back, or if you need more room
to accommodate cables, recesses, or protrusions, use either the
14mm, or 24mm spacer [15 or 16].
In step 1-1 if you selected the:
M4 x 30mm screw [07] use the M4 washer [12] and spacer
[15].
M6 x 40mm screw [09], use the M6/M8 washer [13] and spacer
[16].
M8 x 40mm screw [11], use the M6/M8 washer [13] and spacer
[16].
Confi rm that the brackets are level on the back of the TV.
Standard confi gurations are shown. For special applications,
or if you are uncertain about your hardware selection, contact
Customer Service.
M6/M8
OR
[07]
[16]
To adjust cord length, gently pull the cord away from the
brackets.
For ease of access, cords should be level with bottom of TV.
[02]
[14]
[13]
[09, 11]
5