MBM BRE98A Manual De Uso E Instalación página 31

operator in case of unexpected cir-
cumstances
.
The following are also danger
zones /
• All the work areas within the ap-
pliance
• All the areas protected by appro-
priate safety and protection systems
such as safety photocell photoelec-
tric curtains, protective panels, in-
terlocked doors, protective casing.
• All the zones within the control
units, electrical cabinets and junc-
tion boxes.
• All the zones around the appliance
in operation when the minimum
safety distances are not being re-
spected.
EQUIPMENT REQUIRED
FOR INSTALLATION /
The authorised technical operator,
in order to perform the installation
operations correctly, must respect
the following requirements:
- 3 and 8 mm screwdriver
- Adjustable pipe wrench
- Gas use tools (hoses etc.)
- Electrician's scissors
- Water use tools (gaskets etc.)
- 8 mm hex socket wrench
- Gas leak detector
- Tools for electric use (cables, ter-
minal blocks, industrial sockets etc.)
- 8 mm nut driver
- Complete installation set (ele etc.)
In addition to the tools listed,
an equipment lifting device is
required.
must comply with all the regulations
relating to lifting equipment.
INDICATION ON RESIDUAL
RISK / Even though the rules for
"good manufacturing practice" and
the provisions of law which regulate
manufacturing and marketing of the
product have been implemented,
"residual risks" still remain which,
THE PRESENT MANUAL IS PROPERTY OF THE MANUFACTURER. ANY REPRODUCTION, EVEN PARTIAL, IS PROHIBITED.
GENERAL AND SAFETY INFORMATION
This equipment
- 7 -
due to the very nature of the appli-
ance, it has not been possible to
eliminate. These risks include:
RESIDUAL
ELECTROCUTION /
This risks remains when intervening
on live electrical and/or electronic
devices.
RESIDUAL RISK OF BUR-
NING / This risks remains
when unintentionally coming
into contact with materials at high
temperatures.
RESIDUAL RISK OF BURNS
DUE TO LEAKING OF MA-
TERIAL / This risks remains
when unintentionally coming into
contact with materials at high tempe-
ratures. Containers that are too full
of liquids or solids that during war-
ming change morphology (changing
from a solid to a liquid), can, if used
incorrectly, cause burns. During ope-
rations, the containers used must be
placed on easily visible levels.
RESIDUAL RISK OF CRU-
SHING LIMBS / This risk exi-
sts where there is accidental
contact between the parts during
positioning, transportation, storage
and assembly.
RESIDUAL RISK OF EXPLO-
SIONS / This risk remains
when:
• there is smell of gas in the room;
• appliance used in an atmosphere
containing substances which risk
exploding;
• using food in closed containers
(such as jars and cans), if they are
not suitable for the purpose.
RESIDUAL RISK OF FIRE /
This risk exists by flammable
liquids / material use / use of
the appliance as a fryer.
2.
EN
RISK OF