OPERATION
Cleaning appliance and parts in
contact with foodstuff
Cleaning at commissioning
Cleaning flue / Checking thermo-
stat and micro switches
Checking safety valve
TROUBLESHOOTING
Whenever the appliance does not work properly, try to solve the less
serious problems using this table.
FAULT
The appliance does not
turn on.
Water does not drain
from the cooking com-
partment.
The inner walls of the
tank are covered with
limestone.
The cooking compart-
ment is stained.
The light indicators do
not turn on.
Tank tipping blocked
If the problem cannot be resolved, turn the appliance off, disconnect it
from the electrical mains and shut all the supply valves. Then contact au-
thorized customer service.
THE PRESENT MANUAL IS PROPERTY OF THE MANUFACTURER. ANY REPRODUCTION, EVEN PARTIAL, IS PROHIBITED.
POSSIBLE CAUSE
The master switch is
•
not connected./ The
residual current device
or circuit breaker has
tripped.
The drain is clogged.
•
The water is too hard;
•
the softener is finished.
Quality of the water.
•
Ineffective detergent.
•
Insufficient rinsing.
•
The master switch is
•
not connected.
The residual current
•
device or circuit brea-
ker has tripped.
Tipping system dama-
•
ged
- 19 -
MAINTENANCE
FREQUENCY
Daily
Upon arrival after installation
Yearly
Semestral
INTERVENTION
Connect the master
•
switch.
Contact authorized cu-
•
stomer service.
Clean the drain filter.
•
Free the drain from re-
•
sidues.
Contact
•
customer
Connect the appliance
to a water softener. /
Regenerate the water
softener. / Descale the
cooking compartment.
Filter the water (Con-
•
tact authorized custo-
mer service.)
Use the recommended
•
detergent.
Rinse once again.
•
Connect the master
•
switch.
Contact authorized cu-
•
stomer service
Contact / Call authori-
•
zed customer service
8.
EN
authorized
service.
/