English
detergent is swallowed,
seek medical attention
immediately. Note the
manufacturer's safety data
sheets!
Before starting work
Do not connect the
high-pressure
cleaner directly to
the drinking water
main.
Only connect the high-
pressure cleaner to the
drinking water main in
conjunction with a backflow
preventer – see "Special
accessories".
WARNING
If drinking water has
–
passed through the
backflow preventer, it can
no longer be regarded as
drinking water.
Do not use the machine with
dirty water.
If there is a risk that dirty water
will occur (e. g., flowing sand),
an appropriate water filter
must be used.
40
Inspect the high-pressure
cleaner
WARNING
The high-pressure cleaner
–
should only be used if it is
in full working order and
undamaged – risk of
accident!
It must be possible to
–
move the switch to the 0
position easily
The switch must be in the 0
–
position
Do not use the machine
–
with a damaged high-
pressure hose, spray
attachment and safety
devices
High-pressure hose and
–
spray attachment in good
condition (clean, moving
easily) and correctly
assembled
For good control of the
–
machine, the handles
should be clean and dry
with no oil or dirt on them
Check the oil level
–
Never attempt to modify
–
the controls or safety
devices in any way
Set up the machine so that
–
it cannot slip or tip over.
Only operate the machine
on a stable and level
ground
Electrical connection
WARNING
Minimize the risk of electrical
shock:
Voltage and frequency of
–
the machine (see rating
plate) must match the
voltage and frequency of
the mains supply
Examine the power cord,
–
power plug and extension
cord for damage. Do not
use the machine with a
damaged connecting cord,
extension cord or
damaged power plug
Only connect the machine
–
to a correctly installed
power socket
RE 232, RE 272 PLUS, RE 282 PLUS