Checking The Oil Level; First Use After Long Periods Of Storage - Stihl RE 232 Manual De Instrucciones

Cleaning the ventilation openings
The machine must be kept clean so that
cooling air can flow freely through the
openings in the machine.
Lubricating the connections
Lubricate the connections on the high-
pressure hose with multipurpose grease
as necessary.
Checking the machine supports
The two front machine supports must be
replaced if damaged or worn, to ensure
the stability of the machine.
RE 232, RE 272 PLUS, RE 282 PLUS

Checking the oil level

max.
min.
Check oil level weekly and after
transport.
Place the machine on a flat
N
horizontal surface
Check that the oil level is between
N
the "min" and "max" marks. If it is
not, contact your servicing dealer.
STIHL recommends STIHL
servicing dealers
First use after long periods of
storage
During long periods of storage, mineral
residue from the water may be
deposited in the pump. This may cause
the motor to start with difficulty or not at
all.
Connect the machine to the water
N
supply and flush thoroughly with tap
water, leave the power cord
unplugged while doing so
Plug the power plug into the wall
N
socket
Switch on the machine with the
N
spray gun open
English
57