Stihl RE 232 Manual De Instrucciones página 53

RE 272 PLUS, RE 282 PLUS
Drawing detergent from the detergent
tank
Fill detergent tank with detergent
N
diluted as specified
Using detergent from a separate
container
Unscrew the cap with intake hose
N
from the detergent container
Screw the cap with intake hose onto
N
a separate container
The cap has a standard thread and fits
all standard separate containers.
Slide the intake hose as far as
N
possible into the separate container
RE 232, RE 272 PLUS, RE 282 PLUS
All versions
Use the detergent metering knob to
N
adjust the amount of detergent to be
added
Detergent metering knob
to the left:
Detergent metering knob
to the right:
When applying detergent, start at
N
the bottom and work upwards
Detergent must not be allowed to dry on
the object to be cleaned
If detergent is no longer to be added:
Set the detergent metering knob to
N
0 % (min)
Let the high-pressure cleaner
N
continue to run with the spray gun
open until no more detergent comes
out of the nozzle
see "Switching off the machine"
N
RE 232
Take the intake hose out of the
N
separate container, rinse it and
push it completely into the opening
in the housing
RE 272 PLUS, RE 282 PLUS
Fitting, removing detergent tank
The detergent tank can be removed
from the machine e. g. to empty or clean
it.
0 % (min)
Unscrew the cap with intake hose
N
from the detergent container
5 % (max)
Pull the detergent tank out of the
N
holder
Precisely calculating/setting the
detergent concentration
For a few detergents, the concentration
must be very precisely set. In this case,
measure the water flow and detergent
consumption.
Set the detergent metering knob to
N
"0 % (min)"
Hold the spray gun into a suitable
N
empty receptacle (> 20 l) and
actuate for exactly 1 minute
Measure the quantity of water "Q" in
N
the container
Fill 2 liters of detergent diluted as
N
directed into a suitable container
(with a scale of 0.1 l) – STIHL
recommends the use of genuine
STIHL detergents
English
51