Stihl RE 232 Manual De Instrucciones página 44

English
Never direct the
high-pressure jet
against yourself or
other people, not
even to clean
clothing or shoes –
risk of injury!
Ensure you always have a
firm and safe footing.
The machine may only be
operated in an upright
position.
Beware of slipping on ice,
water, snow or uneven
ground!
Keep the high-pressure
cleaner as far away as
possible from the object being
cleaned.
Do not cover the machine and
ensure adequate motor
ventilation.
Do not direct the high-
pressure jet against animals.
Do not direct the high-
pressure jet onto places you
cannot see.
Children, animals and
bystanders must remain at a
distance.
42
Hazardous substances (e. g.
asbestos or oil) must not be
allowed to escape into the
environment unchecked when
working with the machine. The
applicable environmental
regulations must be observed
without fail.
Surfaces of asbestos cement
must never be cleaned with a
high-pressure jet. Hazardous,
breathable asbestos fibers
may be released in addition to
the dirt. The danger is
greatest when the washed
surface has dried.
Delicate parts made of rubber,
fabric or similar materials
must not be cleaned with a
pencil jet, e. g. from the rotary
nozzle. Maintain a sufficient
distance between the high-
pressure hose and the surface
when cleaning to avoid any
damage to the surface being
cleaned.
The trigger on the spray gun
must move easily and
automatically return to its
starting position when
released.
Hold the spray attachment
firmly with both hands in order
safely to withstand the
kickback force and additional
torque produced when using
spray attachments with
angled spray lance.
Do not buckle or loop the high-
pressure hose.
Ensure that the power cord
and the high-pressure hose
are not damaged by being
driven over, squashed or
pulled; protect them against
heat and oil.
Do not touch the power cord
with the high-pressure jet.
If the machine is subjected to
a strain for which it was not
designed (e. g., heavy impact
or a fall), always check that it
is in good condition before
continuing work - refer also to
the chapter "Before starting
work". Also make certain that
the safety mechanisms are
working properly. Never
continue using a machine that
is not in perfect working order.
In case of doubt, have the unit
checked by your servicing
dealer.
Before leaving the machine
unattended: Switch off the
machine – unplug the power
cord.
RE 232, RE 272 PLUS, RE 282 PLUS