Belkin OmniView SMB CAT5 Manual Del Usuario página 22

Installation
Connecting Servers to the SMB CAT5 KVM Switch
(USB Connection):
Step 1
Make sure your server is powered on.
Step 2
Using the Belkin OmniView SMB Server Interface Module for USB
(F1DP101AeaAU), connect the VGA connector to the monitor port on your
server. (Refer to diagram below.)
Step 3
Connect the USB connector to an available USB port on the server. (Refer to
diagram below.)
1
2
3
4
5
6
7
8
19