Belkin OmniView SMB CAT5 Manual Del Usuario página 33

Using Your SMB CAT5 KVM Switch Using Your SMB CAT5 KVM Switch
With a daisy-chain switch configuration, you can switch between BANKs (KVM
switches) by pressing "Scroll Lock", "Scroll Lock", "Page Up", to switch to the
previous BANK. Press "Scroll Lock", "Scroll Lock", "Page Down", to switch to
the next BANK. (Refer to diagram below.)
With a daisy-chain switch configuration, you can switch directly to any port on
any BANK by pressing "Scroll Lock", "Scroll Lock", BANK address, and Port
Number. For example, if you press "Scroll Lock", "Scroll Lock", "03", "05", the
server on BANK 03, Port 5 will become active. (Refer to diagram below.)
NOTE: You will have approximately five seconds to complete each hot
key sequence.
See page 36 for instructions on how to change the hot key initiator key.
30