Keyboard Hot Key Command Shortcuts - Belkin OmniView SMB CAT5 Manual Del Usuario

Using Your SMB CAT5 KVM Switch Using Your SMB CAT5 KVM Switch

Keyboard Hot Key Command Shortcuts

Below is a complete list of hot key commands that can be used for your SMB
CAT5 KVM Switch:
SL, SL, Up Arrow
SL, SL,
Down Arrow
SL, SL, Page Up
SL, SL,
Page Down
SL, SL, Y
SL, SL, X, Y
SL, SL, Space Bar,
F10
SL, SL, Space Bar
SL, SL, F4
NOTE: You will have approximately five seconds to complete each hot
key sequence.
38
Switch to PREVIOUS ACTIVE port
Switch to NEXT ACTIVE port
Switch to PREVIOUS BANK
(By default, selects first active port on the BANK)
Switch to NEXT BANK
(By default, selects first active port on the BANK)
Directly switches to PORT Y on BANK 00
(Single-Switch Configuration) Y=01 to 16
Directly switches to PORT Y on BANK X
(Daisy-Chain Configuration) (X=00 to 15)
(Y=01 to 04 for F1DA104T)
(X=00 to 15) (Y=01 to 08 for F1DA108T)
(X=00 to 15) (Y=01 to 16 for F1DA116T)
Monitor DDC2 (identifies monitor settings)
Activate On-Screen Display
Enable AutoScan mode (refer to AutoScan button)