Descargar Imprimir esta página

MBM BRG98A/912T Manual De Instalación página 34

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 81
be conveyed into the grey water dis-
charge network in an open "glass" un-
siphoned formation.
The appliance must only be
used for the purposes indicated.
Any other use must be consid-
ered "IMPROPER" and therefore the
manufacturer declines all liability for
any consequent damage to persons or
property.
Particular safety prescriptions
(obligation-prohibitions-danger)
are detailed in the specific chap-
ter concerning these issues.
Do not obstruct the heat extrac-
tion and/or dissipation openings.
Do not leave flammable objects
or material near the appliance.
stream the appliance whenever you
need to work in safe conditions.
Whenever it is necessary to op-
erate inside the appliance (con-
nections,
checking operations, etc.) prepare for
the necessary operations (removal of
panels, elimination of supply) in com-
pliance with the safety conditions.
DUTIES AND QUALIFICATIONS
REQUIRED OF OPERATORS
Prohibition for the homogeneous
operator to perform any type of
operation (maintenance and/or
other) without having first read the en-
tire documentation.
The information con-
tained in this document
is for the use of the
qualified technical operator who is
authorised for: handling, installation
and maintenance of the appliance in
question.
THE PRESENT MANUAL IS PROPERTY OF THE MANUFACTURER. ANY REPRODUCTION, EVEN PARTIAL, IS PROHIBITED.
GENERAL AND SAFETY INFORMATION
Disconnect all sup-
plies if present (e.g
gas - electrical) up-
commissioning,
drawn up for the "Generic" operator
(Operator with limited responsibilities
and tasks). Person authorised and em-
ployed to operate the appliance with
guards active and capable of perfor-
ming routine maintenance (cleaning
the appliance).
The operators who use the ap-
pliance must be trained in all as-
pects concerning its functioning
and safety features. They must there-
fore interact using appropriate meth-
ods and instruments, complying with
required safety standards.
The "Generic" operator
operate on the appliance after
the technician has completed in-
stallation (transportation, fixing electri-
cal, water, gas and drain connections).
WORK AREAS
AND HAZARDOUS ZONES /
To better define the scope of interven-
tion and the relevant work zones, the
following classification is provided:
• Dangerous zone: any zone within
and/or in proximity to a machine in whi-
ch the presence of an exposed person
constitutes a risk in terms of the health
and safety of such a person;
• Exposed person: any person that is
found wholly or partly in a dangerous
zone.
Maintain a minimum distance
from the appliance when operat-
ing in such a way as to avoid en-
dangering the safety of the operator in
case of unexpected circumstances
The following are also danger zones
/ • All the work areas within the appli-
ance • All the areas protected by appro-
priate safety and protection systems
such as safety photocell photoelectric
curtains, protective panels, interlocked
doors, protective casing. • All the zones
within the control units, electrical cabi-
- 6 -
The
operating
structions
have
in-
been
must
.

Publicidad

loading

Este manual también es adecuado para:

Brg78a