Publicidad
Idiomas disponibles
Idiomas disponibles
brasive cloth.
In order to eliminate all humidity, once
routine cleaning has been finished,
turn the appliance on and run it at mi-
nimum for approximately 2/3' and then
turn it back off (see procedure part 3
Instructions for use: Switching On/Off).
If necessary, repeat the operations de-
scribed above for a new cleaning cycle.
CLEANING FOR PROLONGED
DEACTIVATION
See chapter 5 / Daily decommissioning
/ Prolonged decommissioning.
Air out the appliances and rooms
regularly
SUMMARISED TABLE: QUALI-
FICATION - OPERATION - FRE-
QUENCY
Cleaning appliance and parts in con-
Cleaning at commissioning
THE PRESENT MANUAL IS PROPERTY OF THE MANUFACTURER. ANY REPRODUCTION, EVEN PARTIAL, IS PROHIBITED.
OPERATION
tact with foodstuff
Cleaning flue
Inspect thermostats
Greasing the gas taps
Check microswitch
Check valve
Before proceeding with the ope-
rations, see chap.2 "Duties and
qualifications"
Should a problem occur, the ge-
neric operator performs the first
search and, if qualified, elimina-
tes the cause of the problem and re-
stores the appliance correctly.
If the problem cannot be resol-
ved, turn the appliance off, di-
sconnect it from the electrical mains
and shut all the supply valves. Then
contact authorized customer service.
The authorized maintenance tech-
nician intervenes when the generic
operator was not able to pinpoint the
cause of the problem, or whenever resto-
ration of correct operation of the applian-
ce entails executing operations for which
the generic operator is not qualified.
Upon arrival after installation
- 22 -
FREQUENCY
Daily
Yearly
Yearly
In case of need
Yearly
Every 6 months
Publicidad
