Garland BULL 1482 NRQG Manual De Instrucciones página 52

English
Operation
Check that there are no loose parts
Check the status of the milling cutters
Check the oil level
Change the engine oil
Clean the air filter
Check the spark plug
8.2.1. OIL BATH FILTER
Warning! Only in engines with an oil bath filter.
1. Remove the filter cover by unscrewing the wing nut
and washer.
2. Fill the base of the filter with clean oil SAE 10w/40
up to the mark "OIL LEVEL" (approx. 70 cc. oil).
3. Place the lid of the air filter with the washer and
wing nut.
BUTTERFLY NUT
WASHER
AIR FILTER COVER
CIRCULAR FILTER
GRILLE
•
•
•
• •
•
Note: The engine should never function without
the air filter installed.
8.2.2. CHANGING THE ENGINE OIL
Perform the oil change only while the engine is still
hot.
52/180
• •
• •
•
OIL DEPOSIT
AIR FILTER BASE
OIL LEVEL
•
•