SOMFY 5054415A Manual De Instalación página 9

Fitting the gate section mounting bracket
Important: On the gate section, measure dimension C (805 mm), the length between the two mounting bracket centres.
Mark the mounting axis for the gate section mounting bracket.
[1] Unlock motor drive rod E.
[2] Temporarily fi t the motor drive unit on its mount P.
[3] Fit the two magnets into the magnet holder G.
[4] Insert the magnet holder G into the mounting bracket F.
[5] Fit the gate section mounting bracket F onto the drive rod E.
[6] Check that the motor drive unit E is horizontally aligned using a spirit level.
[7] Attach the gate section mounting bracket F.
F
E
G H
I
P
After fi tting the mounting bracket:
[1] Position spacer H,
[2] Insert the drive rod and attach it using ring I.
Specifi c installations
Installation with a niche in a fence Installation with a niche in a gate post
7
Copyright © 2008 Somfy SAS. All rights reserved.