Bosch Professional GBH 2-24 RE Manual Original página 15

OBJ_BUCH-2460-001.book Page 15 Thursday, May 7, 2015 10:48 AM
Technical Data
Rotary Hammer GBH ...
Article number 3 611 ...
Speed control
Stop rotation
Right/left rotation
Quick change chuck
Rated power input
Impact rate
Impact energy per stroke according to
EPTA-Procedure 05/2009
Rated speed
Tool holder
Spindle collar diameter
Drilling diameter, max.:
– Concrete
– Brickwork (with core bit)
– Steel
– Wood
Weight according to EPTA-Procedure 01/2003
Protection class
The values given are valid for a nominal voltage [U] of 230 V. For different voltages and models for specific countries, these values can vary.
Noise/Vibration Information
Sound emission values determined according to
EN 60745-2-6.
Typically the A-weighted noise levels of the product are:
Sound pressure level 92.5 dB(A); Sound power level
103.5 dB(A). Uncertainty K =3 dB.
Wear hearing protection!
Vibration total values a (triax vector sum) and uncertainty K
h
determined according to EN 60745-2-6:
Hammer drilling into concrete: a
h
2
Chiselling: a =13.9 m/s , K=1.5 m/s
h
The vibration level given in this information sheet has been
measured in accordance with a standardised test given in
EN 60745 and may be used to compare one tool with anoth-
er. It may be used for a preliminary assessment of exposure.
The declared vibration emission level represents the main ap-
plications of the tool. However if the tool is used for different
applications, with different accessories or insertion tools or is
poorly maintained, the vibration emission may differ. This
may significantly increase the exposure level over the total
working period.
An estimation of the level of exposure to vibration should also
take into account the times when the tool is switched off or
when it is running but not actually doing the job. This may sig-
nificantly reduce the exposure level over the total working
period.
Identify additional safety measures to protect the operator
from the effects of vibration such as: maintain the tool and the
accessories, keep the hands warm, organisation of work pat-
terns.
Bosch Power Tools
min
min
Declaration of Conformity
We declare under our sole responsibility that the product de-
scribed under "Technical Data" is in conformity with all rele-
vant provisions of the directives 2011/65/EU, until
19 April 2016: 2004/108/EC, from 20 April 2016 on:
2014/30/EU, 2006/42/EC including their amendments and
complies with the following standards:
EN 60745-1, EN 60745-2-6.
Technical file (2006/42/EC) at:
Robert Bosch GmbH, PT/ETM9,
2 2
=13.1 m/s , K=1.5 m/s
70764 Leinfelden-Echterdingen, GERMANY
2
Henk Becker
Executive Vice President
Engineering
Robert Bosch GmbH, Power Tools Division
70764 Leinfelden-Echterdingen, GERMANY
Leinfelden, 07.05.2015
Assembly
 Before any work on the machine itself, pull the mains
Auxiliary Handle
 Operate your machine only with the auxiliary handle
2-24 RE 2-24 DRE
B72 0.. B72 1..

–

–
W 790
-1
0–4200 0–4200
J 2.7
-1
0–930 0–930
SDS-plus SDS-plus
mm 48.5
mm 24
mm 68
mm 13
mm 30
kg 2.8
/II
Helmut Heinzelmann
Head of Product Certification
PT/ETM9
plug.
14.
English | 15
2-24 DFR
B73 0..
 
 
 

–
790 790
0–4200
2.7 2.7
0–930
SDS-plus
48.5 48.5
24 24
68 68
13 13
30 30
2.8 2.9
/II /II
1 609 92A 170 | (7.5.15)