Dometic Marine Climate System MCS10 Instrucciones De Montaje página 11

MCS5, MCS10, MCS15
Failure to comply may allow bilge or engine room vapors to mix with
the air conditioners return-air and contaminate living areas which
may result in injury or death.
 In order to prevent the ingress of carbon monoxide (CO) or other
harmful vapors, a trap should be installed in the condensate drain
line(s).
 Installation and servicing of this system can be hazardous due to
system pressure and electrical components.
 Place a fire extinguisher close to the work area.
 Never install your air conditioner in the bilge or engine room areas.
 Ensure that the selected location is sealed from direct access to bilge
and/or engine room vapors.
! CAUTION!
 Wear safety glasses and work gloves.
NOTICE!
A
 Attach the air conditioner unit to a solid level platform with the four
mounting brackets provided.
2.2 Safety Handling Electrical Cables
! CAUTION!
 Attach and lay the cables in such a manner that they cannot be tripped
over or damaged.
A NOTICE!
 Use cable ducts to lay cables through walls with sharp edges.
 Do not lay loose or bent cables next to electrically conductive
materials (metal).
 Do not pull on the cables.
3 Target Group
The instructions in this manual are intended for qualified personnel at
workshops who are familiar with the guidelines and safety precautions to
be applied.
EN
Target Group
11