Fein WSG20-230 Manual De Instrucciones página 19

Original Instructions. en
Symbols, abbreviations and terms used.
Symbol, character Explanation
General prohibition sign. This action is prohibited.
Do not touch the rotating parts of the power tool.
Observe the instructions in the text or graphic opposite!
Make sure to read the enclosed documents such as the Instruction Manual and the General
Safety Instructions.
Before commencing this work step, pull the mains plug out of the socket. Otherwise there will
be danger of injury if the power tool should start unintentionally.
Use eye protection during operation.
Use ear protection during operation.
Use protective gloves during operation.
A surface that can be touched may be very hot and thus hazardous.
Gripping surface
Additional information.
Confirms the conformity of the power tool with the directives of the European Community.
This sign indicates a possible dangerous situation that could cause severe or fatal injury.
WARNING
Worn out power tools and other electrotechnical and electrical products should be sorted
separately for environmental-friendly recycling.
Product with double or reinforced insulation
Character Unit of measure-
ment, international
n
/min, min
r/min
P
W
1
P W
2
U
V
f
Hz
M... mm
Ø mm
mm
mm
mm
kg
Unit of measure-
ment, national
-1
, rpm, rpm
W
W
V
Hz
mm
mm
mm
mm
mm
kg
Explanation
Rated speed
Power input
Output
Rated voltage
Frequency
Size of metric thread
Diameter of a round part
Ø =Max. diameter of grinding/cutting disc
D
Ø =Diameter of mounting hole
H
T=Thickness of grinding/cutting disc
Ø =Max. sanding pad diameter
D
M=Thread for clamping flange
l=Length of mounting thread
Weight according to EPTA-Procedure 01/2003
en
19