Descargar Imprimir esta página

Brandt BPI163DUB Manual De Instrucciones página 46

Publicidad

Idiomas disponibles

Idiomas disponibles

Make sure the cooktop is turned on.
Note: you can use the minute minder even if you're not
selecting any cooking zone.
Touch "+" the controls of the timer. The minder
indicator will start flashing and "10" will show
in the timer display.
Set the time by touching the "-" or "+" control
of the timer
Hint: Touch the "-" or "+" control of the timer
once to decrease or increase by 1 minute.
Touch and hold the "-" or "+" control of the timer to
decrease or increase by 10 minutes.
Touching the "-" and "+" together, the timer
is cancelled, and the"00" will show in the minute
display.
When the time is set, it will begin to count down
immediately. The display will show the remaining
time and the timer indicator will flash for 5 seconds.
Buzzer will beep for 30 seconds and the timer
indicator shows "- - " when the setting time finished.
b) Setting the timer to turn one cooking zone off
Touching the heating zone selection control that you want to
set the timer for. (e.g. zone 3#)
Touch timer control, the minder indicator will start flashing
and "10" will show in the timer display.
Set the time by touching the or control of the timer
Hint: Touch the "-" or "+" control of the timer
once will decrease or increase by 1 minute.
Touch and hold the "-" or "+" control of the timer
will decrease or increase by 10 minutes.
Set one zone
EN-17

Publicidad

loading

Este manual también es adecuado para:

Bpi6364bBpe6411xm