Cameo ZENIT Z120 G2 Manual De Usuario página 4

The warning triangle with lightning symbol indicates dangerous uninsulated voltage inside the unit, which may cause an
electrical shock.
The warning triangle with exclamation mark indicates important operating and maintenance instructions.
Warning! This symbol indicates a hot surface. Certain parts of the housing can become hot during operation. After use, wait for
a cool-down period of at least 10 minutes before handling or transporting the device.
Warning! This device is designed for use below 2000 metres in altitude.
Warning! This product is not intended for use in tropical climates.
Caution! Intense LED light source! Risk of eye damage. Do not look into the light source.
CAUTION! IMPORTANT INFORMATION ABOUT LIGHTING PRODUCTS!
1. The product has been developed for professional use in the field of event technology and is not suitable as household lighting.
2. Do not stare, even temporarily, directly into the light beam.
3. Do not look at the beam directly with optical instruments such as magnifiers.
4. Stroboscope effects may cause epileptic seizures in sensitive people! People with epilepsy should definitely avoid places where
strobes are used.
INTRODUCTION
OUTDOOR ZENIT ZOOM 120 G2
CLZZ120G2
CONTROL FUNCTIONS
3-channel, 4-channel, 5-channel 9-channel, 10-channel, 11-channel and 17-channel DMX functions
Master/Slave operation
Stand-alone functions
FEATURES
Outdoor spotlight with zoom function and a 120 W COB LED (RGBW). 7 DMX modes. DMX-512 control. Master/Slave operation. Stand-alone
functions. Stand or mounting bracket and 16 mm TV spigot included. Omega bracket included. Operating voltage 100–240 V AC/50–60 Hz.
Power consumption 180 W. IP65 protection rating.
The spotlights feature the RDM standard (remote device management). Remote device management allows the user to view status and
configuration of RDM terminals via an RDM-capable controller.
4
CAUTION:
To reduce the risk of electric shock, do not remove cover (or back). There are no user serviceable
parts inside. Maintenance and repairs should be exclusively carried out by qualified service
personnel.