Publicidad
Idiomas disponibles
Idiomas disponibles
Oil change indicator
The oil change indicator (1) illuminates when
the distance covered by the scooter arrives
at the oil change interval specified in the user
and maintenance schedule (page 82).
Reset the indicator after every oil change, as
follows.
1. Press and hold the RESET button (2), then
turn ON the ignition switch. Keep the reset
button pressed for 3 seconds. The oil
change indicator wil go off.
If the oil is changed before the oil change
indicator illuminates, remember that the
indicator must anyway be reset. In this case,
follow the procedure described at point 1,
but when you continue to hold down the
reset button the oil change indicator will
illuminate for 2 seconds and then switch off.
This sequence of events means that the
indicator has been reset.
28
All manuals and user guides at all-guides.com
The first oil change is at 1000 km (600 miles),
but in this case the indicator should not be
reset. The indicator will appear after the
scooter has covered approximately 4,000 km
(2500 miles for the type E). Therefore, after
the second engine oil change as prescribed
by the maintenance schedule (page 82)
remember to reset the oil change indicator.
(1)
(1) Oil change indicator
(2) RESET button
(2)
Publicidad
