Publicidad
Idiomas disponibles
Idiomas disponibles
3. Disconnect the spark plug cap (4) from
the spark plugs.
4. Clean any dirt from around the spark
plug bases.
Remove the spark plug using the spark
plug wrench (5) furnished in the tool kit.
5. Discard the spark plug.
(4)
(4) Spark plug cap
Spark plug wrench
(5)
All manuals and user guides at all-guides.com
(5)
6. Check the new spark plug gap (6) using a
wire-type feeler gauge. If adjustment is
necessary, bend the side electrode (7)
carefully.
The gap should be:
0,80 - 0,90 mm (0.031 - 0.035 in)
Make sure the plug washer is in good
condition.
7. With the plug washer attached, thread
the spark plug in by hand to prevent
cross-threading.
(7)
(6) Spark plug gap
(7) Side electrode
(6)
97
Publicidad
